
NSW Planning Reforms 2026: What Homeowners Need to Know About Renovations, Exempt Development, CDCs and Council Approvals
By Adam Murphy | Principal Building Designer at ANS Design
Published: November 2026 | Sydney, NSW
The NSW Government has outlined further planning reforms intended to reduce unnecessary development applications and simplify approval processes. But will these changes make it easier for Sydney homeowners to renovate, extend or improve their homes?
For homeowners considering a kitchen renovation, internal alterations, home extension or second-storey addition, understanding the difference between exempt development, complying development and a full Development Application (DA) remains essential.
A new NSW Government announcement published on 6 November 2026 has attracted attention for its proposals to reduce planning red tape.
However, there is an important distinction: the November announcement primarily concerns proposed planning changes for small businesses and commercial premises. It does not introduce a new blanket exemption for residential home renovations.
Separate reforms to NSW’s Complying Development Certificate (CDC) system could have more direct implications for homeowners, particularly where a residential design narrowly fails to satisfy an existing development standard.
At ANS Design, we believe homeowners should understand these differences before committing to architectural plans, construction costs or building contracts.
This article explains what has been announced, what approval pathways already exist, what may change and how to approach a renovation under the current NSW planning system.
1. What Did the NSW Government Announce on 6 November 2026?
On 6 November 2026, the NSW Government published a ministerial release outlining proposed measures to improve productivity, support housing delivery and simplify business planning approvals.
The announcement included commitments to:
- Reduce the need for full development applications for certain common business activities.
- Expand eligibility for exempt and complying development.
- Simplify development application documentation where a DA remains necessary.
- Introduce clearer documentation requirements and report page limits for relevant business applications.
- Standardise certain development consent conditions.
- Improve access to information about planning and regulatory obligations.
The examples specifically identified included minor commercial renovations, internal fit-outs, changes of use, trading hours and signage.
The announcement also discussed changes to the timing and administration of local infrastructure contributions associated with development.
These commitments were presented as measures proposed by a re-elected Minns Labor Government.
What does this mean for homeowners?
The direction of reform suggests continued interest in streamlining development approvals, but the November announcement does not establish new residential renovation exemptions or identify a definitive list of home improvements that will become approval-free.
It would therefore be premature to assume that removing an internal wall, enlarging a home or converting a garage will automatically become exempt development.
For residential projects, the existing approval framework continues to be the starting point.
Official source: NSW Government — Re-elected Minns Labor Government to Boost Productivity and Deliver More Homes and Jobs, 6 November 2026
2. Do You Currently Need Council Approval to Renovate a House in NSW?
Not necessarily.
NSW already provides several pathways for residential building work, depending on the proposed activity, property constraints and applicable development standards.
The three principal pathways are:
Pathway 1 — Exempt Development: No DA or CDC Required
Exempt development allows certain minor, low-impact works to be undertaken without obtaining development consent or a Complying Development Certificate.
Examples that may qualify include:
- Internal painting and decorative improvements.
- Certain non-structural internal alterations.
- Replacing or repairing specified building finishes.
- Some like-for-like window and door replacements.
- Certain fences, garden sheds and small ancillary structures.
- Some decks, pergolas and carports.
However, exemption is not determined simply by calling a project a minor renovation.
Every applicable requirement must be satisfied, including the conditions and exclusions within the relevant legislation.
Works must also comply with applicable building safety requirements. Separate licences or approvals may still be necessary.
A project that exceeds an exempt development standard cannot simply be treated as exempt because it is relatively inexpensive or small.
The principal legislation is the State Environmental Planning Policy (Exempt and Complying Development Codes) 2008, commonly known as the Codes SEPP.
Homeowners can also consult the NSW Planning guide to exempt development.
Pathway 2 — Complying Development Certificate (CDC)
A CDC is a streamlined approval pathway for eligible development that satisfies prescribed planning and construction standards.
Depending on the property and proposed work, this can include:
- Internal alterations involving changes to existing room layouts.
- New openings and certain external alterations.
- Residential extensions and additions.
- Certain first-floor additions.
- Eligible attic conversions.
- Garages, carports and other ancillary structures.
- Some secondary dwellings and new homes.
A CDC can be assessed by council or an appropriately registered certifier.
Unlike exempt development, a CDC is still a formal approval that must be obtained before the relevant building work commences.
A proposal must comply with the applicable development standards, including restrictions relating to the site and building.
The NSW Government advises that eligible CDC approvals can be issued in as little as 20 days. This is a potential assessment timeframe, not a guaranteed turnaround for every project.
Read the official NSW Planning guide to complying development.
Pathway 3 — Development Application (DA)
Where a renovation does not qualify as exempt or complying development, a Development Application may be required.
A DA involves assessment by the relevant consent authority, usually the local council, against applicable State and local planning controls.
Depending on the proposal, matters for consideration may include:
- Building height, setbacks and floor space ratio.
- Streetscape character and building appearance.
- Privacy and overlooking.
- Overshadowing and solar access.
- Heritage impacts.
- Landscaping, drainage and site coverage.
- Flooding, bushfire risk and other site constraints.
- Neighbouring property amenity.
A DA may offer greater design flexibility than the prescriptive CDC pathway, but generally requires more extensive planning documentation and assessment.
Following development consent, a Construction Certificate will ordinarily be needed before relevant building work starts.
At ANS Design, our design and approvals process considers the appropriate pathway before detailed documentation is finalised.
3. Which Home Renovations May Already Be Easier to Approve?
The practical starting point is not whether a renovation sounds minor, but whether its actual scope meets the existing legal requirements.
The following examples illustrate how different projects may be treated.
Kitchen and Bathroom Renovations
Replacing kitchen cabinetry, benchtops, fixtures and finishes may qualify as exempt development where the works satisfy the relevant provisions.
However, relocating plumbing, undertaking waterproofing, altering structural elements or changing the building configuration can introduce further compliance and approval considerations.
A bathroom renovation in a strata apartment may also require owners corporation approval, independently of any council planning requirements.
Removing an Internal Wall
Removing a wall can appear straightforward on a floor plan, but its structural function must first be established.
A non-load-bearing alteration may be eligible for a simpler pathway, subject to the relevant standards.
A wall that supports the roof, floor framing or another building element requires appropriate structural assessment and may require formal approval.
A wall should never be assumed to be non-structural simply because it is internal.
Replacing Windows and Doors
Certain like-for-like replacements may be exempt.
However, enlarging a window opening, introducing a new doorway or modifying an external wall can affect structural integrity, energy performance, fire safety, privacy and heritage considerations.
These changes may require a CDC or DA depending on the circumstances.
Decks, Pergolas and Outdoor Living Areas
Outdoor improvements are particularly popular across Sydney, including Western Sydney and the Hawkesbury.
Some decks, pergolas and similar structures can qualify as exempt development.
Others may require approval due to their dimensions, height, setbacks, relationship to boundaries or location on constrained land.
Home Extensions and Second-Storey Additions
Larger additions generally require formal planning approval.
A qualifying proposal may be approved through a CDC under the relevant housing code, while another property or design may require a DA.
Factors commonly influencing the pathway include building height, setbacks, lot dimensions, overshadowing, privacy, landscaping and site constraints.
These projects benefit from professional planning assessment before the homeowner commits to a preferred layout.
4. The Separate 2026 CDC Reforms Could Be More Important for Homeowners
While the November announcement focuses on business planning approvals, a separate reform program has the potential to affect residential alterations and additions more directly.
In May 2026, the NSW Government exhibited proposals concerning variations and changes to complying development.
Public exhibition occurred between 14 May and 24 June 2026.
The reforms include a proposed mechanism allowing councils to assess limited variations to certain complying development standards.
Why Does This Matter?
Currently, a residential proposal that fails to satisfy an applicable mandatory CDC standard may need to be redesigned or assessed through a DA.
This can occur even where the departure is relatively minor.
For example, a proposed home addition might otherwise satisfy the applicable requirements but fall short of a particular setback or building height standard.
Under the proposed system, a council could potentially issue a variation certificate for an eligible departure, allowing the CDC assessment to continue.
This would not mean that all non-compliant projects could proceed through CDC.
Rather, it would create a controlled process for dealing with certain minor departures.
What Standards Might Be Considered?
The NSW Government has identified potential variations concerning matters such as:
- Building setbacks.
- Building height.
- Maximum gross floor area.
- Vehicle access requirements.
The specific eligible standards and limits would need to be established in the applicable legislation.
Importantly, the proposed variation certificate would be assessed by council, while the CDC could subsequently continue through the appropriate certifier or council assessment process.
Other Proposed Changes Relevant to Homeowners
The wider proposal has also considered:
- Allowing certain internal alterations on flood control lots.
- Expanding complying development opportunities on sloping sites.
- Simplifying balcony and privacy-screen provisions.
- Providing greater flexibility for some garage designs.
- Expanding qualifying low-impact remedial works.
- Reviewing requirements for certain residential building configurations.
These proposals could be particularly relevant to established residential areas, where existing homes and irregular site conditions sometimes make strict compliance difficult.
Reform status as at 22 November 2026: The official NSW Planning material reviewed for this article continues to describe these measures as proposed and under consideration. Homeowners should not rely on the proposed variation pathway as though it is already available.
Read the official NSW Planning — Variations and Changes to Complying Development.
For further analysis, see our previous article: Can a CDC Be Varied in NSW? — ANS Design.
5. Renovation Approval Examples: Which Pathway Might Apply?
| Proposed work | Possible current pathway | Important consideration |
|---|---|---|
| Internal painting and decorative finishes | Exempt development | Relevant requirements and exclusions still apply |
| Replacing kitchen cabinetry | Potentially exempt | Depends on scope and whether other building work is involved |
| Bathroom renovation | Exempt, CDC or DA depending on scope | Waterproofing, structural changes and strata requirements may apply |
| Removing or relocating internal walls | Exempt or CDC; DA in some circumstances | Structural assessment and applicable standards are critical |
| Installing or enlarging a window | Exempt, CDC or DA | Opening size, heritage and construction requirements matter |
| Building a deck or pergola | Exempt, CDC or DA | Height, dimensions, setbacks and site constraints |
| Ground-floor home extension | CDC or DA | Housing Code eligibility and planning controls |
| Second-storey addition | CDC or DA | Height, setbacks, structure, privacy and overshadowing |
| Garage conversion | Exempt, CDC or DA depending on the work and use | Habitable-room and dwelling requirements, parking and fire safety |
| Detached secondary dwelling | CDC or DA | Separate dwelling standards, site eligibility and services |
This table is a general guide, not an approval determination. The correct pathway can only be established by assessing the proposed works and the property against the legislation in force.
6. What About Heritage Homes, Flood-Prone Land and Bushfire-Affected Properties?
One of the most important issues for homeowners is that statewide planning reforms do not remove every site-specific planning restriction.
A house in an established suburb may be affected by controls that do not apply to an otherwise similar property elsewhere.
Heritage Properties and Conservation Areas
Heritage considerations can restrict the use of exempt or complying development, particularly for changes affecting significant building elements or external appearance.
Even relatively modest alterations can require further assessment depending on the property’s heritage status and applicable provisions.
Flood-Prone Properties
Flood-related planning controls may affect the availability of particular CDC pathways.
This can be relevant in parts of the Hawkesbury, Penrith and other locations with identified flood risk.
Changes to a ground-floor layout, habitable floor levels or the building footprint should be considered in light of the applicable flood planning requirements.
Bushfire-Prone Land
CDC approval can be available on some bushfire-prone sites, subject to the applicable code requirements and bushfire protection provisions.
A renovation may also involve additional construction requirements associated with bushfire exposure.
Difficult or Constrained Sites
Other issues can include:
- Narrow or irregular allotments.
- Steep slopes and retaining walls.
- Easements and sewer infrastructure.
- Existing encroachments or non-compliant structures.
- Protected trees and vegetation.
- Stormwater drainage limitations.
This is why ANS Design recommends checking site constraints before developing a renovation concept.
Read: Before You Design: Why NSW Planning Due Diligence Matters for DA and CDC Projects.
7. Will Easier Planning Approvals Remove BASIX or Building Code Requirements?
No.
Streamlining planning approvals does not automatically remove building safety, structural, sustainability or construction requirements.
BASIX Requirements
In NSW, BASIX requirements generally apply to alterations and additions to existing dwellings with an estimated development cost of $50,000 or more, where the relevant BASIX provisions apply.
For renovations requiring BASIX, the assessment may influence:
- Insulation and thermal performance.
- Window and glazing specifications.
- Energy efficiency.
- Water efficiency.
- Heating and cooling considerations.
A BASIX certificate may need to accompany the relevant DA or CDC application.
A homeowner should not assume that a project becomes exempt simply because its estimated cost falls below the BASIX threshold. The approval pathway and BASIX applicability are separate questions.
Official guidance: NSW Planning — About BASIX.
ANS Design article: BASIX in NSW: How It Impacts Your Home Design.
National Construction Code and Structural Safety
Applicable provisions of the National Construction Code (NCC) remain important.
Depending on the work, these can concern structural adequacy, fire safety, waterproofing, ventilation, access and other building performance requirements.
Licensed trades and contractors may also be required even where the development itself qualifies as exempt.
Official reference: NSW Government — Building and Trade Licences.
8. Renovating an Apartment or Townhouse? Strata Approval Is a Separate Issue
For apartment owners, planning approval is only part of the picture.
NSW strata renovation rules distinguish between cosmetic work, minor renovations and major renovations.
Depending on the nature of the proposed work, an owner may need approval from the owners corporation, even where no council DA or CDC is necessary.
Examples requiring careful consideration include:
- Bathroom renovations involving waterproofing.
- Changes to structural walls.
- Work affecting common property.
- Changes to ceilings or external building elements.
- Certain flooring modifications.
Owners should review their strata by-laws and the applicable legislation before making commitments to builders or purchasing materials.
Official source: NSW Government — Strata Renovation Rules.
9. Could the Reforms Reduce Renovation Costs and Delays?
Potentially, but the benefits depend on which reforms are ultimately implemented and whether an individual project qualifies.
For homeowners, the most significant possible advantages of an expanded CDC framework would include:
Less unnecessary redesign
Where a minor departure from an eligible standard could be considered through a variation process, applicants might avoid substantial redesign solely to satisfy a rigid numerical control.
Fewer full development applications
Some projects that might otherwise require a DA could potentially proceed through a streamlined pathway if the legislation is amended accordingly.
More predictable assessment
A clearly defined approval process can make it easier to plan consultant involvement, documentation and construction.
Greater design flexibility
Carefully targeted variations may allow better responses to an existing building or unusual site without necessarily compromising planning outcomes.
However, simplified approval does not eliminate the need for proper design documentation, structural engineering, certifier assessment or other specialist input.
A faster pathway is only useful where the resulting design is compliant, practical and buildable.
10. Should Homeowners Wait for the Proposed Reforms Before Renovating?
For most homeowners, the sensible approach is to begin with a proper assessment of the current planning controls rather than delaying all design work in anticipation of future changes.
The November 2026 announcement does not establish a commencement date for new residential renovation exemptions.
Similarly, the separate CDC variation reforms should not be assumed available until the relevant provisions have commenced.
Homeowners can still make meaningful progress by investigating the property and preparing a design that responds to existing requirements.
A Practical Six-Step Renovation Strategy
Step 1 — Define the proposed works
Establish whether the project involves cosmetic improvements, internal reconfiguration, structural alteration, additional floor area or a change in the building’s use.
Step 2 — Review the existing property
Obtain available building plans, previous development approvals and a survey where necessary. Consider whether the existing structure can accommodate the proposed changes.
Step 3 — Investigate planning constraints
Check the applicable Local Environmental Plan (LEP), Development Control Plan (DCP), Codes SEPP provisions, property title, relevant Section 10.7 Planning Certificate and available NSW Planning Portal mapping.
Step 4 — Identify the appropriate approval pathway
Establish whether the proposed work qualifies as exempt development, complying development or requires a DA.
Step 5 — Coordinate design and technical requirements
Consider structural engineering, stormwater drainage, BASIX, heritage, bushfire, flood planning and other matters as relevant.
Step 6 — Prepare appropriate documentation
Develop the required drawings and supporting documents to a level suitable for the applicable assessment pathway.
For more information about the ANS Design approach, visit Our Approvals and Design Process.
11. Frequently Asked Questions About NSW Renovation Approvals
Will home renovations be exempt from council approval under the new reforms?
The 6 November 2026 announcement does not create a blanket residential renovation exemption. It primarily outlines proposed reforms concerning small business activities. Existing residential exempt development rules continue to apply.
Do I need a DA to renovate my kitchen in NSW?
Not always. Certain internal renovation works may qualify as exempt development, provided all applicable standards and exclusions are satisfied. More substantial structural or configuration changes may require a different pathway.
Can I remove an internal wall without council approval?
Possibly, depending on the wall and the scope of work. Whether it is load-bearing, the nature of the alteration and the applicable planning provisions must be assessed.
Can I add a second storey under CDC?
Some eligible second-storey additions may proceed through CDC if all relevant requirements are met. Other proposals require a DA. Structural capacity and planning controls remain important considerations.
Will NSW allow variations to CDC building setbacks?
A proposed variation certificate process could permit limited departures from specified development standards, including some setback controls. The official material reviewed for this article still describes the relevant reforms as proposed.
Does a renovation costing less than $50,000 need approval?
The cost of a renovation alone does not determine whether it requires a DA or CDC. The $50,000 figure is relevant to BASIX applicability for alterations and additions, not a general exemption from planning approval.
Can I convert my garage into a bedroom or granny flat without approval?
A garage conversion should be assessed carefully. Requirements may involve ventilation, natural light, fire safety, structural adequacy, parking and whether an additional dwelling is being created. Different approval pathways may apply depending on the intended use and design.
Will reforms apply equally to every council area?
Statewide planning instruments provide common rules, but eligibility can still depend on the land, proposal and applicable exclusions. Site-specific conditions and local planning controls can remain relevant.
12. ANS Design’s Perspective: Good Planning Should Support Good Design
Planning reform has the potential to improve residential development outcomes where it removes unnecessary complexity without weakening appropriate design and construction standards.
However, reducing approval requirements does not remove the need for thoughtful building design.
A successful renovation should consider much more than the minimum planning controls.
It should improve the way a home functions, respond to its existing structure, make appropriate use of natural light and ventilation, and provide practical long-term value.
For example, rearranging internal spaces may deliver greater liveability without increasing the building footprint.
Alternatively, a carefully designed rear extension may improve the relationship between indoor living areas and outdoor space.
In some circumstances, a second-storey addition can provide additional accommodation while retaining valuable garden area.
The most appropriate solution depends on the existing building, site conditions, homeowner requirements and budget.
At ANS Design, we consider the approval pathway alongside these design objectives from the beginning.
This can help avoid developing a concept that is visually appealing but difficult to approve or construct.
13. Planning a Renovation in Sydney or NSW? Speak to ANS Design
Whether you’re considering a modest home improvement, structural alterations, a new living area, a garage conversion or a major residential addition, understanding the approval requirements early is essential.
Adam Murphy, Principal Building Designer at ANS Design, provides building design, planning assessment and development documentation services across Sydney and New South Wales.
Our services include:
- Residential alterations and additions.
- Ground-floor and first-floor extension design.
- Internal layout reconfiguration.
- Preliminary planning and approval pathway assessment.
- Development Application (DA) documentation.
- Complying Development Certificate (CDC) documentation.
- BASIX and consultant coordination.
- Council and certifier documentation support.
We assist homeowners in Greater Sydney, Western Sydney, Penrith, the Hawkesbury, the Inner West, Newcastle and surrounding NSW areas.
Before committing to construction, find out what your property can accommodate and which approval pathway may be available.
Contact ANS Design to discuss your renovation or home extension.
Phone: 0412 508 336
Website: www.ansdesign.com.au
ANS Design — Practical Residential Building Design, Planning and Approval Documentation Across Sydney and NSW.
Official Government References and Further Reading
The following sources provide further information about the planning requirements and proposed reforms discussed in this article.
- NSW Government — Re-elected Minns Labor Government to Boost Productivity and Deliver More Homes and Jobs, 6 November 2026
- NSW Government — Making It Easier to Build Homes in NSW, 14 May 2026
- NSW Planning — Variations and Changes to Complying Development: Explanation of Intended Effect
- NSW Legislation — State Environmental Planning Policy (Exempt and Complying Development Codes) 2008
- NSW Planning — Exempt Development
- NSW Planning — Complying Development
- NSW Planning — Home Renovation Approval Pathways
- NSW Planning — BASIX Requirements
- NSW Government — Strata Renovation Rules
- NSW Government — Approvals Needed for Your Building Project
Disclaimer: This article provides general information current as at 22 November 2026. Proposed reforms may be amended, delayed or not implemented. Development standards, legislation and site restrictions should always be confirmed at the time of assessment. This article does not constitute a site-specific planning determination or legal advice.
At ANS Design, preliminary planning and site assessments form an important part of developing practical residential design solutions.

Adam Murphy
Principal Building Designer
ANS Design
© 2026 ANS Design. All rights reserved
